The DMT SB-804 is the extended version of the SB-803 with two sender cards on board. It’s capable of configuring big led screen setups.
The device takes a digital video (DVI or HDMI) input and converts it, so it can be sent over a single CAT-5 (RJ45) cable to your LED Screen.
Connections are made by Neutrik Ethercon connectors ensuring a reliable connection in any situation.
With SB-804 you don’t have to worry about which version Led Studio to use. SB-804 let’s you patch your led screen directly from the internal menu, so no need for a computer with Led Studio anymore.
| Sendercard Type | 2x 802 |
|---|---|
| Video input | 2x DVI-D + HDMI |
| Scaling | NO |
| Outputs to screen | 2x 2 ethercon(RJ45) soft-patched connectors |
| Power input | Powercon IN/OUT |
| Setup port | USB-B, |
| RS 232 connection on the back side. The RS 232 is used for cascade | |
| Screen brightness control | 16-levels adjustment on the front panel |
| Resolutions | 1024 x 768, 1280 x 768, 1280 x 800, 1280 x 768, 1280 x 1024, 1366 x 768, 1440 x 900, 1440 x 1080, 1600 x 576, 1600 x 900, 1600 x 1000, 1600 x 1200, 1680 x 1050, 1728 x 1296, 1920 x 1080 |
| Power consumption | 25 watts |
| Input voltage | 85-264 volts,50-60Hz |
| Weight | 4.8Kg(10lbs) |
| Dimensions | 48cm*26.8cm*4.4cm |
| Standard rack size | 1U |
