The CVT4K-S is a high performance fibre converter which can be used with the MCTRL4K controller(101652) / UHD jr.(101633) / UHD(101634).
CVT4K-S handles signal transmission of 16 Ethernet runs by optical fibre cable and allows long-distance signal transmission up to 10KM, that are stable and will not easily be interfered. The required SFP modules with LC interface are included.
Each output has an indicator on the front panel which allows you to instantly check if all outputs are transmitting data. CVT4K-S not only has an internal redundant power supply but also redundant fibre ports to assure maximum reliability during each show/event.
| Control Method | USB / Network Interface |
|---|---|
| Output Interface | 16x Ethernet output ports |
| Input Interface | 4 x Fibre Input ports, OPT1(out1-8); OPT2(out 9-16); OPT3/4 are backup for OPT1/2 |
| SFP port | Required SFP modules are included! |
| Optical fibre transmission rate | 9.95Gb/s-11.3Gb/s |
| Optical fibre connector type | LC connector |
| Maximum transmission distance | 10Km. |
| Wave length | 1310nm. |
| Supply Voltage | AC-100-240V-50/60HZ |
| Power consumption | 10Watt |
| Dual power connection | IEC or Powercon (switchable) |
| Dimensions | 482.6x386x96mm (including handles) |
| Dimensions | 445x308x 89mm (width without handles) |
| Weight | 4.6Kg. |
| Operating temperature | -20 ~ +60° |
| Operating humidity | 10% RH–90% RH, non-condensing |
| Certifications | FCC / RoHS / UL&CUL / EAC / CB / IC / CE |
